US Coins 1841 Seated Liberty Dime with Stars

US Coins 1841 Seated Liberty Dime with StarsUnited States Coins 1841 Seated Liberty Dime

US Coins 1841 Seated Liberty Dime with Stars

The obverse design for the series featured an image of Liberty seated on a rock, looking over her left shoulder and behind. In one hand she holds a pole with a Phyrigian or Freedom cap on top of it, while the other hand rests on a shield with the inscription LIBERTY on a scroll. Thirteen stars, representing the original thirteen states, were added to the obverse.
The reverse design featured  a wreath of laurel tied with a bow at the base. The inscription UNITED STATES OF AMERICA appears around and the denomination ONE DIME is within.

US Coins

1841 Seated Liberty Dime with Stars        1844 O Seated Liberty Half Dime

1838-1860 Seated Liberty Dime With Stars History

   By 1838, "Hard Times" had descended upon the nation. Thousands of people quite literally didn't know where their next meal was coming from. The deep economic depression brought on by over-speculation and a collapse in real estate prices almost halved the price of cotton and forced every New England textile mill to close, with one exception: Nathaniel Stevens' mill in North Andover, Massachusetts. It not only remained open but expanded its production, taking up the slack for all the others. Workers there got above-average wages of $4.50 per week plus $2 for board, for a 76-hour workweek.
   Ten cents was a significant sum of money, nearly two hours' pay at the Stevens mill. Thus, the American public took very careful note of the new 10-cent piece just showing up in its pocket change at the time: the Seated Liberty dime. Actually, the coin had made its first appearance in 1837, the year before. But in 1838, the United States Mint made a fundamental change in its design, adding 13 stars along the obverse border encircling the central portrait of Liberty. Those stars would remain in place until 1860, and the "Stars Obverse" dimes would come to be regarded as a major, distinct component of the Seated Liberty series.
   Very few coins of any denomination were jingling in most Americans' pocket change in 1838; the depression had led to hoarding of federal coinage, and so-called Hard Times tokens were being widely used as a money substitute. When coins did appear, however, the likelihood was high that they would include Seated Liberty pieces, for during the late 1830s, the new design was introduced not only on the dime but also on all four other silver coins then being issued: the half dime, quarter dollar, half dollar and dollar.
   The Seated Liberty portrait resulted from the teamwork of two highly talented men: portraitist Thomas Sully, who designed it, and Mint engraver Christian Gobrecht, who executed dies from the artwork. It depicts a seated figure of Liberty with her right hand resting upon a shield and her left hand grasping a pole topped by a Liberty cap symbols of preparedness and freedom. On the quarter and half dollar, the Mint retained essentially the same reverse as the one that had appeared on their immediate predecessors from the Capped Bust series: a naturalistic eagle with a shield superimposed upon its breast. On the half dime and dime, however, the eagle gave way to a simple statement of value. On the dime, the inscription ONE Dime appeared within a wreath, and that in turn was encircled by UNITED STATES OF AMERICA.
   In 1838, some dimes came with small stars, others with large stars. Slightly more than 406,000 dimes were struck that year at the newly opened New Orleans branch mint without the stars on the obverse; otherwise, all dimes of that date were struck in Philadelphia and have the stars. From 1841 onward, Seated Liberty dimes displayed a fold of drapery at the crook of Liberty's elbow, the result of modifications by miniaturist Robert Ball Hughes. This was intended in part to give the portrait greater "respectability" (a theme that would emerge again 75 years later, when Liberty's bare breast on the Standing Liberty quarter led to hasty revisions to head off scandal). Prior to that, most examples bore no trace of this. "Partial drapery",an illusion caused by die-clashing, was visible on some 1838 issues, but the new full drapery design didn't appear until 1840. For that year, it was coined in relatively small numbers. Besides adding the drapery late in 1840, the Mint also adjusted Liberty's shield to an upright position.
   The California Gold Rush of the mid-19th century had an almost immediate impact on U.S. coinage: By adding so much gold to existing supplies, it depressed the market value of that metal in relationship to silver, and that in turn led to widespread hoarding and melting of silver coins. These were soon worth more as metal than as money. To restore proper balance between the two metals and thereby halt the hoarding, the Mint reduced the weight of its silver coins. The change took place in 1853 and was signified on the dime by the placement of two arrows alongside the date.
   By 1856, the public had become acclimated to the silver coins' new weight, so the Mint removed the arrows. The 1856 dimes came in two varieties, with large and small dates, but both are quite common. The 1853-1855 dimes with arrows also are relatively common, but the 1853 dime without arrows has a mintage of only 95,000 and is one of the scarcer Stars Obverse dimes. Other scarce issues include 1846, 1856-S, 1858-S and 1859-S. Branch-mint examples were struck at both New Orleans and San Francisco, and their "O" or "S" mintmarks can be found on the reverse, above the bow of the wreath.
   Although the entire Stars Obverse dime production from 1838 to 1853 and again from 1856 through 1860 totaled over 51 million pieces, mintages varied widely, from a low of 31,300 in 1846 to over 5.7 million in 1856. Proofs were made for public sale in 1858 and 1859 but also are known for earlier dates. Included is an 1841 dime that lacks drapery (even though its business-strike counterparts had it) because excessive die-polishing removed it almost completely.
   In 1860, the Mint removed the stars from the dime, replacing them with UNITED STATES OF AMERICA along the obverse border. To fill the void left on the reverse by this motto's departure, it simply enlarged the wreath. Patterns were struck in 1859 with the old obverse (having stars along the border) and the new reverse. These "transitional" pieces are quite rare and noteworthy in that they lack any mention of the nation's identity.
   The San Francisco Mint struck 140,000 Seated Liberty dimes with stars in 1860, ringing down the curtain on this interesting sub-series. Otherwise, all Seated Liberty dimes from 1860 onward, right to the end of the series in 1891, have UNITED STATES OF AMERICA on the obverse. In 1892, the Barber dime made its debut, along with its companion quarter and half dollar.
   Seated Liberty dimes with stars exist in substantial numbers in grade levels up to Mint State-64. The supply thins out considerably in MS-65 and drops sharply in levels of MS-66 and above. Points to check for wear include Liberty's breast and knee and the tips of the leaves on the wreath. A complete set consists of nearly three dozen pieces, and while that is not excessively long, this group is collected most often by type, rather than by date and mint. It is, after all, just one part of the complete Seated Liberty dime series, and the series as a whole spanned more than half a century.

1837-1891 Liberty Seated Dimes: Composition and Specifications
  Liberty Seated Dimes were produced at the Philadelphia, New Orleans, San Francisco and Carson City Mints between 1837 and 1891, with only the Philadelphia Mint having a continuous run. It is interesting to note that the Civil War did not have as much influence on the coinage of this denomination compared to the half dimes, although some of the Philadelphia issues of that era are scarce.
  All Liberty Seated dimes were struck on planchets with a composition of 90% silver and 10% copper, although the weight varied during the course of the series. Dimes struck from 1837-1853 have a weight of 2.67 grams (41.20 grains), from 1853-1873 the weight was 2.49 grams (38.43 grains), and from 1873 to the end of the series the weight was 2.50 grams (38.58 grams). All were struck with a reeded edge and have a diameter of 17.9 millimeters.
  The mint mark, for all issues except those of Philadelphia, is found on the reverse, usually below the wreath. Only on the 1875 issues from San Francisco and Carson City Mints some varieties have the mint mark placed inside the wreath.
  Production quality of this type varies greatly, and it is difficult to give some sort of standard for each of the Mints. While the Liberty Seated Dimes struck at the New Orleans Mint are notorious for often being weakly struck, this is not always the case, and many Philadelphia and San Francisco issues are also found with weak strikes. For most dates problem-free examples are obtainable, although this task becomes more difficult for some of the noted rarer dates of the series.

1837-1891 Liberty Seated Dimes: Mintages
The Liberty Seated Dime was produced for more than five decades at four different mint facilities with numerous small design changes taking place periodically. This lends to a wide range of mintage levels during the course of the series.
  The lowest mintages for the series occurred at the Philadelphia Mint during the years of the Civil War, culminating at the absolute low of 6,000 pieces struck during 1867. A unique rarity for the series also exists with the 1873-CC No Arrows Liberty Seated Dime. The Carson City Mint had initially struck 12,400 examples of the coin, however after a change in the standard weight, all of these pieces were melted except for one known example.
  During the series there are six different issues with a mintage greater than ten million. The first occurred for the 1853 dime with arrows at 12,078,010. Production was higher following a decrease in the standard weight for the denomination. The other five high mintage issues occur later in the series after the final design modification placed the legend on the obverse of the coin.
  The mintages for each issue of the Liberty Seated Dime series appear following with headings to denote the significant design changes.

Stars on Obverse
1838 1,992,500
1839 1,053,115
1839-O 1,323,000
1840 981,500
1840-O 1,175,000
1840 377,500
1841 1,622,500
1841-O 2,007,500
1842 1,887,500
1842-O 2,020,000
1843 1,370,000
1843-O 150,000
1844 72,500
1845 1,755,000
1845-O 230,000
1846 31,300
1847 245,000
1848 451,500
1849 839,000
1849-O 300,000
1850 1,931,500
1850-O 510,000
1851 1,026,500
1851-O 400,000
1852 1,535,500
1852-O 430,000

Ahwash, Kamal M., Encyclopedia of United States Liberty Seated Dimes 1837-1891, Kamal Press, Wallingford, PA, 1974.
Bowers, Q. David, United States Dimes, Quarters and Half Dollars, Bowers and Merena, Wolfeboro, NH, 1986.
Breen, Walter, Walter Breen's Complete Encyclopedia of U.S. and Colonial Coins, F.C.I. Press/Doubleday, New York, 1988.
Greer, Brian, The Complete Guide to Liberty Seated Dimes, DLRC Press, Virginia Beach, VA, 1992.
Taxay, Don, The U.S. Mint and Coinage, Arco Publishing Co., New York, 1966.